Raw Sewage Cleanup
Raw sewage cleanup treats Category 3 black water and includes both drying and disinfection.
See raw sewage cleanupGet Category 3 sewage removed after a backup in a basement, shower, floor drain or lower level in Druid Hills. The work includes contaminated-material removal, cleaning, disinfection, structural drying and odor control.
Sewer backup cleanup is the safe removal of wastewater and sewage solids after a drain, toilet or sewer line overflows, followed by cleaning, disinfection, drying and odor control in every affected area.
Wastewater from a sewer backup may come up through the toilet, shower, utility sink or a basement floor drain. It can travel behind baseboards, beneath appliances and onward to adjoining rooms. Category 3 black water is how sewage is classified, so avoid direct contact even if it seems diluted or a surface looks dry.
Sewage cleanup goes beyond typical water damage work. Cleanup technicians in protective equipment contain the work area. They extract the wastewater and take out contaminated material that cannot be cleaned fully. Washable hard surfaces are cleaned before an EPA-registered disinfectant is applied for the contact time listed on its label. Each stage is recorded, including moisture checks and drying.

The work area is separated from clean rooms, and technicians use protective equipment while extracting sewage and moving contaminated materials.
Your discussion with an adjuster or property manager can be supported by pictures, material inventories, moisture data and job documentation.
With a clear scope covering what was affected, what may stay or go and how drying will be checked, you can move forward.
Your belongings are sorted by whether they can be cleaned, need specialist attention or cannot be recovered, with important items discussed before removal.
Sewer cleanup services are needed when wastewater leaves the plumbing system and enters an occupied or storage area. Common situations include:
After rising from a floor drain, wastewater moves over concrete and finished flooring to belongings or wall bases.
When sewage enters an office, restroom, shop or storage space, access and surrounding areas require control.
A garden unit, laundry area or other below-grade room is reached as the backup moves past the drain.
Another overflow soaks previously affected materials, increasing the need for careful removal and moisture mapping.
Start by keeping exposure low and limiting any further flow of wastewater into the space. The details vary by situation. When a broader emergency response is underway, respect entry restrictions issued by law enforcement, utilities or firefighters. Complete these actions ahead of sewer backup cleaning:
Call (888) 440-9227Published sewage biohazard cleanup data is the closest basis for this service. In the cited guides, most homeowner jobs or a typical project fall between $2,000 and $10,000. A separate published pricing guide lists a broader range from $1,500 to $8,000. Your sewer backup cleanup cost is shaped by the area reached, absorbed sewage in materials, required drying and waste disposal.
Published national cost guides are the source for these ranges, rather than an inspection of your property. The price for your property is set after the on-site assessment, and you hear it before work starts.
Ask about cost: (888) 440-9227Whether insurance applies depends on the specific policy and the reason for the backup. A standard property policy might exclude water entering from a sewer or drain if you did not add a sewer backup endorsement.
Retain cleanup records and the plumber's report along with pictures, an item list and moisture measurements. Pictures are not worth entering an area that is unsafe.
Personal property may fall under a renter's policy as the building owner addresses plumbing and the structure. Responsibility and coverage depend on the lease, cause and policies.
Check with the insurance company about sewer or drain backup coverage, the deductible and whether cleanup services and affected contents are included.
Ask about required advance approval, records for the adjuster, coverage for emergency response and mitigation, and documentation of materials discarded because of health concerns.
The active flow must stop before sewer backup restoration services start. A careful sequence keeps contaminated water from being carried into unaffected parts of the building. You should receive an explanation of every stage from the team before any work begins.
The cleanup crew locates the visible boundary, checks nearby rooms and uses moisture readings to find water that moved beneath or behind surfaces.
Separation keeps clean rooms apart from the affected area. In every situation, protective equipment must match exposure to wastewater, contaminated debris and splashes.
Pooled wastewater and solid matter are taken out using equipment meant for contaminated water. Throughout every step, keep equipment and waste within the contained zone so the detailed cleaning process can follow.
Carpet, pad, wet insulation, swollen drywall and other porous materials that cannot be fully disinfected are carefully removed and contained. Hazardous materials not related to the sewage need their own assessment and proper waste process.
The remediation process continues with washing remaining hard surfaces to remove soil. Application of an EPA-registered disinfectant follows, using the complete contact time on its label.
This part of the cleanup involves air movers and dehumidifiers that dry the structure. Equipment is placed according to moisture checks, which also reveal hidden materials needing added attention.
The source is removed first. Once source removal is complete, focused odor treatment and air filtration can address smells in nearby materials as well as the affected area.
After cleaning, the area is inspected for visible soil, lingering odor and remaining moisture. The entire process is recorded in photos and documents for insurance companies and property owners, showing each removal and anything left behind.
Phone any hour. A specialist in sewer backup cleanup takes your call, explains each step and agrees on a start time with you.
Raw sewage creates serious health risks through possible contact with contaminated debris, harmful microorganisms and bodily fluids. People can be exposed by splashes, tracked wastewater or contact with skin.
Wastewater can move beneath floating floors, behind baseboards and into wall cavities. Cleaning only the visible floor can leave contaminated materials and trapped moisture behind.
Mold growth on damp materials can start within 24 to 48 hours, the EPA says. Stopping the plumbing problem leaves sewage removal and structural drying as important remaining steps.
Sewage may contain organisms linked to disease, so it is considered Category 3 black water. Footwear can track contamination, clothing can become wet and splashes can occur even when you wear gloves.
Can you clean it yourself? Only consider cleaning a very limited non-porous area when you have protective gear and can rule out electrical danger and exposure to anyone vulnerable. Choose professional sewage cleanup if sewage affected porous materials such as wood, carpet, drywall or insulation, entered a cavity, or spread beyond visible edges.
Hard, non-porous materials may be kept when every surface can be reached, cleaned and disinfected. Porous materials that absorbed sewage often need removal. Any unrelated hazardous materials found in the work area need separate assessment and should not be mixed with sewage debris.

Sewer backup restoration lasts until sewage is removed, contaminated materials are addressed and the remaining structure reaches acceptable moisture conditions. Repair or other restoration services can follow after the cleaned structure is dry. The size of the backup, hidden water and the materials affected matter more than room count alone.
| Scene | Typical time on site |
|---|---|
| Small hard-surface area | Extraction, cleaning and moisture checks may be completed before structural drying is needed |
| Finished room with porous materials | Drying, disinfection and removal proceed until readings confirm the structure is ready |
| Several rooms or hidden cavities | The job takes longer when flooring, walls, cabinets or insulation must be opened and dried |
Effective sewer odor removal starts at the source by removing sewage. Spraying a surface or using bleach or fragrance cannot correct wastewater inside absorbent contents, under floors or within drywall. If smells return once you can no longer see water, check for contamination or moisture that may be hidden.
First, workers remove contaminated materials and clean hard surfaces. HEPA filtration may then reduce airborne particles. Where suitable, moving air and dehumidifiers assist with drying. Treatment for odor follows source removal. The inspection extends to nearby rooms, HVAC openings and cabinets where contamination or moisture might remain.
The full sewer backup cleanup guide covers what is cleaned or removed, odor and air quality work, and the rules that apply in DeKalb County.
Read the full sewer backup cleanup guide
Local population patterns, housing and site access may affect how containment and cleanup are planned.
At 42.4% renter occupancy, cleanup needs vary between leased units and owner occupied homes, especially around authorization for demolition.
The 1962 median year matters during odor work because cabinets, wall cavities, and floor layers can hold the source.
A 20.3% share living alone still matters because delayed discovery can increase odor movement and the amount of affected material.
Housing at 58.1% single-family occupancy calls for flexible cleanup planning rather than assumptions based on one building type.
Your phone conversation can include questions about service in nearby ZIP codes and communities.
Raw sewage cleanup treats Category 3 black water and includes both drying and disinfection.
See raw sewage cleanup
Soaked insulation and affected soil are included in crawl space sewage cleanup.
See crawl space sewage cleanup
Blood, body fluids and other infectious materials are removed, followed by property disinfection.
See biohazard cleanup
Complete decontamination treats the room, its surfaces and the air after a hazardous or infectious exposure.
See biohazard decontamination
Contamination is cleared through biological remediation, returning the space to safe use.
See biohazard remediation
Rentals, residences and public bathrooms receive human feces cleanup and disinfection.
See human feces cleanup
EPA-registered products are applied across all surfaces during infectious disease disinfection.
See infectious disease disinfection
Day or night, biohazard cleanup begins once the scene has been released.
See emergency 24/7 biohazard cleanupAvoid all plumbing use, keep pets and people away, and get the blockage fixed. Cleanup requires sewage extraction and removal of absorbent materials that took it in. Hard surfaces are washed, disinfected with an EPA-registered product for the full contact time and structurally dried. Hidden moisture under flooring and behind baseboards should also be checked.
Wait for a plumber to inspect the pipes before using nearby drains, the toilet or shower. Keep bare skin away from the wastewater. Soil must be removed before cleaning and disinfecting the shower, floor, drain surround and adjacent surfaces. If water escaped onto drywall, cabinets, carpet or wood, those materials also need assessment for absorption.
Complete disinfection is often not possible for sewage-soaked cardboard, carpet padding, insulation, swollen drywall and similar porous material. Belongings with hard, non-porous surfaces might be cleaned. Photograph significant items and ask about your insurance obligations before disposal. Contain materials during removal to keep wastewater from spreading through clean rooms.
There is neither a reliable time for symptoms nor a single period that is safe to wait. How contact occurred, what was present in the sewage and individual health determine the risk. Wash exposed skin right away and contact a medical professional or poison control service for advice after a meaningful exposure, especially if sewage reached the eyes or mouth.
Have a plumber or the relevant sewer authority identify the source and stop it. For the property, look for sewage cleanup services that explain containment, material removal, disinfection, drying and documentation. When electrical items are involved, do not enter. Before anyone steps into the water, call the utility or a qualified electrician.
Possibly, depending on what caused the loss and the wording of your policy. Standard coverage can exclude water entering through a sewer or drain unless a backup endorsement was purchased. Ask whether the insurer covers personal property, damaged building materials and cleanup, and find out which records and deductible apply before assuming coverage.
Respectful, discreet sewer backup cleanup is available 24 hours a day, and crews arrive in unmarked vehicles.